kinghui-mobile phone lcd,mobile phone battery,mobile phone housing,mobile phone handsfree,mobile phone charger,mobile phone original battery,mobile phone original lcd,mobile phone original battery,mobile phone handsfree,mobile phone flashing battery,mobile phone lcd screen,mobile phone battery,mobile phone handsfree,mobile phone charge,mobile phone datacable,mobile phone design housing.mobile phone keypad,and mobile phone accessories.

Lab tool-48 Universal Programmer

Feature
- The LabTool-48 is a universal device programmer which works through your PC's parallel port. It features a 48-pin universal pin driver. It supports over 3000 different devices including PAL, GAL, CEPAL, CPLD, EPLD, PEEL, MAX, MACH, pLSI, microprocessors, EPROM, Serial PROM, PROM and Flash memory.
- Supports all GSM/CDMA/GPRS phone's memory to read & write ,direct to repair problem phones.
- Support memory/cpu/pal and about more than 3000 device.
- 48-pin ZIF with device insert/contact check
- Auto-sense/Self programming with statistical report (for mass production)
- No adapter required for DIL chip up to 48-pin guarantee
- Support 3.3 V low voltage chips
- Program 16-Mbit Flash within 120 seconds
- Support Windows 3.x, Windows 95/98/me/2000 and DOS, free lifetime software upgrade
- Universal 48-pin BGA, 44-pin PLCC, 40-pin TSOP, 44-pin PSOP and 48-pin TSOP 56-pin TSOP adapters

- Universal pin driver--True universal programming
The MOSFET logic controls the programmer's pin switches, so each pin can supply Vcc, Vpp or ground. Pins can also be configured for TTL high/low levels with pull-high/pull-low, high-speed clock and tri-state. This advanced pin design lets you program any DIP device up to 48 pins without an adapter. It also ensures support for the full range of silicon technologies on the market--today and tomorrow.

- Unbeatable programming speed
The LabTool-48's on-board intelligence reduces system overhead to a minimum. The LabTool-48 can program an 8-Mbit EPROM in less than 100 seconds. (The actual throughput depends slightly on the processing power of your PC; the above time was with a 486DX2-66 processor.) The LabTool-48 is much faster than its competitors, making it much more productive with today's high-density, multi-megabit memory devices.

- Device insertion and contact checks--No mistakes!
The LabTool-48 performs device insertion and contact checks before it programs each device. It can detect poor pin contact and devices inserted upside down or in the wrong position. This function protects your pocketbook by preventing expensive chip damage due to operator error.

- EPROM and Flash memory ID detection
Many EPROMs and Flash memories have a burnt-in device ID and manufacturer ID. The LabTool-48 can read the device's ID to determine its vendor and product number. This feature is especially useful with second-user chips and devices that have had their part number accidentally (or intentionally!) removed.

- Auto-sensing and self-programming
To meet mass-production requirements the LabTool-48 has implemented new patented technology in both its hardware and software. After entering the Mass-production Mode, the production line operator inserts a device into the ZIF socket. An LED on the LabTool-48 will indicate the device is programmed successfully and the operator simply removes it and replaces it with a new one. No formal training is necessary adding flexibility and saving time and money. In addition, the LabTool-48's auto-sensing feature ensures the device has been inserted correctly and then automatically programs the device. Furthermore, in the mass-production mode the system keyboard is automatically disabled preventing the operator from making any inadvertent mistakes.

- Memory buffer auto Increment
If your memory devices need individual serial numbers, the LabTool-48 has an Auto Increment function, This simply increments the serial numbers in the buffer each time a new device is inserted. This saves time and money. The LabTool-48 has everything you need in one package: 48-pin driver, socket and complete device support library. You don't need to order separate device libraries.

- User-selectable verify voltage, one- or two-pass verification
The LabTool-48 lets you select the verify voltage after you have programmed the device, e.g., 5 V, 5 V ?%, 5 V ?0%. This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.

- Easy operation--Get to work immediately
The programming software's easy-to-use graphical interface eliminates your learning curve--you don't need the manual! Like MS-Windows, the software offers pop-up dialog
boxes and on-line help. You can simply type the device vendor's name and part number. The software will select the proper driver automatically; you don't need to search one by
one through long lists of devices.

- Project file save option
You can save a configuration project file which contains the device select, the buffer data and all the programming setup options, This file can be called upon at any time for future use without having to go through the setting up procedure again.

- Non-DIP device support through versatile converters
The LabTool-48's universal pin driver capability lets it program all 48-pin DIP devices without DIP-to-DIP adapters, including all single-chip microcontrollers. The market, however, offers many choices besides DIP devices, such as PLCCs, SOPs, TSOPs, QFPs and SDIPs. We have developed over 40 different converters to support these special-package devices. The LabTool-48's universal pin driver significantly reduces the number of converters required, reducing your cost for future expansion. For example, a single 44-pin PLCC adapter lets it program all 44-pin PLCC devices.

- File format conversion
JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S and HP 64000ABS

System requirements

Operating system:
DOS Version: DOS 3.1 or higher (or Windows DOS prompt)
Windows Version: Windows 3.x, Windows 95/98/ME/2000
Processor: 386, 486, Pentium or Pentium Pro
4 MB RAM minimum, 8 MB recommended
Hard disk with 8 MB free space
Parallel port interface

General

Power: 100 to 240 VAC, auto-switching
Freq. range: 47 to 63 Hz
Power consumption: 25 W
Operating temperature: 5 to 45¡